Microcomputer pressure type hot and cold rolling laminating machine CY-LD6M

1. This machine is a strong surface fabric with hot melt adhesive or inner lining machine.

1. Personnel (4.6 people) can sit on both sides of the conveyor belt and work on fabric and hot melt adhesive;

2. When the hot melt adhesive plastic sheet is placed in the surface of the mask, it will be placed directly on the conveyor belt, and the material will enter the machine with the conveyor belt, which will automatically heat and roll and fit;

3. This machine can omit the operator of the oil press machine, and does not need personnel to do the work of pressing and sticking;

4. This machine presses the pneumatic pressure, and the conveyor speed is adjustable.

Second, the working principle

The decorative sheet material is fixed on the upper surface, and is heated and pressurized by a conveyor belt in the machine.

Third, the scope of application

The upper material fits.

Fourth, the characteristics

1. Continuous operation to improve production efficiency;

2. The automatic serpentine correction device ensures the normal operation of the conveyor belt;

3, the use of seamless Teflon conveyor belt to extend the service life, while improving the bonding effect;

4, the special design of the heating line, so that the temperature difference between the two sides and the middle is controlled within a more reasonable range;

5. Set 6 interlayer temperature control detection systems in front, back, and up/down, which can be selected according to different pieces. At the same time, advanced electronic temperature regulator and solid state relay (SSR) are used to achieve accurate temperature control.

6, using air pressure method, the pressure is more uniform and the adjustment is more simple and accurate;

7. Set a cooling device at the receiving port to ensure that the piece is cooled and set in a short time.