Microcomputer air pressure type hot and cold rolling lamination machine CY-LD6M

1. This machine is a laminating machine for strong profile fabric and hot melt adhesive or inner lining. Machine description:

1. Personnel (4.6 people) can sit on both sides of the conveyor belt and do the work of placing fabrics and hot melt adhesives;

2. When the hot-melt plastic sheet is placed in the facial section, it is directly placed on the conveyor belt, and the material will enter the machine with the conveyor belt, and will be automatically heated, rolled, and laminated;

3. This machine can omit the operator of the oil pressing machine, and there is no need for personnel to do the work of pressing and sticking;

4. The pressing of this machine adopts pneumatic pressure, and the speed of the conveyor belt is adjustable.

2. Working principle

Fix the trim material on the shoe upper, and heat and pressurize it through the conveyor belt in the machine.

3. Scope of application

Upper material fit.

4. Features

1. Continuous operation to improve production efficiency;

2. The automatic serpentine correction device is adopted to ensure the normal operation of the conveyor belt;

3. Adopt seamless Teflon conveyor belt to prolong the service life and improve the bonding effect at the same time;

4. The heating wire is specially designed to control the temperature difference between the two sides and the middle within a more reasonable range;

5. Set up a total of 6 interlayer temperature control detection systems, which can be selected according to different pieces. At the same time, advanced electronic temperature regulators and solid state relays (SSR) are used to achieve accurate temperature control;

6. The air pressurization method is adopted, the pressure is more uniform and the adjustment is simpler and more accurate;

7. A cooling device is installed at the receiving port to ensure that the pieces are cooled and shaped in a short time.